Blue Ridge Ultra-Lite Stove Works

CONTENTS

·         1 – Lighter (can not be mailed - in store only)

·         1 – Aluminum Windscreen

·         1 – 2 Cup Container

·         1 – 4 Cup Container

·         2 – 4oz. Flip Top Fuel Bottles

·         1 – Wire Mesh Pot Stand

·         1 – 3 Cup(24oz) Pot With Lip Guard and Handle Wrap

·         1 – 2 Cup Coffee Perk-O-Tator

·         1 – Perk-O-Tator Alcohol Stove

   

FREEDOM DESIGN DRAFTING

&

BLUE RIDGE ULTRA-LITE STOVE WORKS

OFFERS:

ELITE A.T. STOVE KIT - WITH PERK-O-TATOR

CONTENTS:

1- Lighter (IN STORE ONLY)

1- Aluminum Wind Screen

1-2 Cup Container

1-4 Cup Container

2-4 oz. Fuel Bottles

1-Wire Mesh Pot Stand

1-24 oz. Pot with Lip Guard and Handle Wrap

1-ELITE A.T. ALCOHOL STOVE

1-2 Cup Coffee PERK-O-TATOR

 

ELITE A.T. STOVE OPERATION:

1. Open kit and place ELITE A.T. Stove on a flat, non-flammable surface.

2. Place 8-10 drops of alcohol on the primer wick, around edge of ELITE A.T. Stove. (CAUTION: NEVER USE LESS THAN 90% ALCOHOL AS A FUEL; NEVER USE ANY FUEL, OTHER THAN ALCOHOL) – (HEET (Yellow Bottle) is Recommended, can be found in most auto parts stores.)

3. Open center fuel port screw and add ½ -1 ½ oz. of alcohol to ELITE A.T. Stove. (½ oz (fuel) for 1 cup (water) avg. 6 min. boil time.)

4. Replace fuel port screw.

5. Place ELITE A.T. Stove back on flat, non-flammable surface.

6. Light primer wick with supplied lighter. Once flames have settled and the primer wick has gone out, place the wire mesh pot stand over and around ELITE A.T. Stove.

7. Add desired amount of water to the supplied 24 oz. aluminum pot and place on wire mesh pot stand. (CAUTION: NEVER PLACE THE ALUMINUM POT ON A LIT ELITE A.T. STOVE WITHOUT WATER IN THE POT-HEATING THE POT WITHOUT WATER WILL RUIN THE POT FOR FUTURE USE)

8. Provided wind screen is to be used outside of the wire mesh pot stand. (CAUTION: NEVER USE THE WIND SCREEN INSIDE THE POT STAND AND ONLY USE

THE WIND SCREEN DURING EXTREMLY COLD/WINDY CONDITIONS. NOTE- DAMAGING/DANGEROUS CONDITIONS WILL/CAN OCCUR IF THIS CAUTION IS NOT FOLLOWED.)

 

PERK-O-TATOR OPERATION:

1. Place 2 cups of water in the 24 oz. Pot then place the perk-o-tator tube and coffee basket in the water.

2. Place your finger tip over the opening in the top of the tube (prevents coffee from entering the tube and water).

3. Place 2 – 4 tablespoons of coffee in the basket and secure the basket lid.

4. The coffee will begin to perk before the water boils (for best results boil at least  2 min).

5. Remove from heat, remove the perk-o-tator basket and tube (CAUTION: HOT).

 

NOTE: 

Basic Use

The ELITE A.T. Stove is to be used to boil water for re-hydration of dehydrated foods and/or for hot water needed for other purposes (i.e.; coffee)

Advanced Use

The ELITE A.T. Stove will cook food directly placed within the 24 oz. aluminum pot; however a watchful eye must be used as without sufficient water and/or stirring of contents, scorching will occur.

 

LIABILITY

Freedom Design Drafting and Blue Ridge Ultra-Lite Stove Works will not be held liable for misuse of any of its manufactured products. Responsible use is solely in the hands of the user. Safe fire practices must be used at all times, while following all local, state and federal regulations concerning fire use.

 

WARRANTY

Warranty is simple:

As long as the ELITE A.T. STOVE KIT is used as advised within this document the user will receive years of continued use of the stove and the contents of the entire kit. However, if a component fails while using as designed, Blue Ridge Ultra-Lite Stove Works will repair or replace the component at the discretion of Blue Ridge Ultra-Lite Stove Works.

 

For questions or additional orders please contact:

Blue Ridge Ultra-Lite Stove Works

(434) 473-3817 (Customer service)

customerservice@blueridgestoveworks.com (Email)